To Install New Or Recycled Car Parts?

If you’re mechanically inclined, good for you! You probably know a lot about installing your own car parts. The problem you might have is the cost of the part that needs to be replaced. There are some options which can help you cut your costs. One great option is using recycled or used car parts.

More and more recyclers are out there than you can ever imagine. And what’s more even great is that their prices are very affordable and so hard to beat. This is because insurance companies tend to just drop off wrecked vehicles at a junk yard to save money.

Here are some facts to consider when using recycled car parts:

• You save money. Instead of buying a new part, used car parts are usually cheaper and most of all, has the same level of quality. Almost all junk yards will give you a warranty on most of their parts so no need to worry.

• You help prevent pollution. Manufacturing new car-parts use up a lot more resources such as oil and raw materials and this is saved by recycling. Our environment benefits when we avoid using raw materials.

• Save a lot of space in landfills. Do not just throw it away, it might be of use. Buying some used car parts will give you the same quality as the original manufactured part.

 

But remember, the do-it yourself installing of your car parts can only be achieved perfectly if you truly have the knowledge and are familiar with the procedures. The manufacturer’s manual is usually not as helpful as a good repair manual for your specific make of car when it comes to installing or replacing your car parts.

Doing this can be a cost-effective way to replace parts in your own car. But if time comes that you doubted yourself, many recyclers are fully certified mechanics who can install your car parts and even help you find the right part for your car.

If you know or you have your own trusted mechanic, you can ask them about recycled car parts, and have them locate and replace the part, or if you want, you can get involved and source the part for them to install for you. Good car recyclers can source the car part needed to be replaced. Your trusted mechanic can also offer you advice on whether to buy recyclable parts or if a new one is required.

Some parts are better suited to buying used than others. Components that wear out like mufflers and brake pads are best replaced with new ones due to safety reasons while standard items such as bumpers and interior trim parts are a great option to buy used ones.

To know more about cars you can click here.

How to Do Amazing Car Detail Work

Although a car looks great after a good wash and wax, to achieve that amazing car-show shine you’ve got to go with a detail job.

What’s the trick to car detailing? It’s in the details. Let’s get started.

Start with the interior

The order you do things is crucial when it comes to detailing. If you leave cleaning your car’s interior for last, then you’ll just wind up blowing dirt and dust on your clean paint.

Start by removing all floor mats, and then go to town with a vacuum on all carpet and upholstery. An air compressor can help you blow out dirt and dust from hard-to-reach places (even heating and air conditioning ducts), and a hard-bristled brush can dislodge a lot of dirt from the mats and carpets.

Really taking the time to clean the dash can take your detail job over the top. Get in all the crevices with a Q-tip, and you can remove knobs to clean underneath.

Household cleaners won’t cut it—use a cleaner that is specifically formulated for cleaning car interiors.

Tires before paint

Warm or hot rubber can easily be worn away, so always wash your tires when they’re cool. Avoid acid-based cleaners on your wheels—they can damage the rubber. A degreaser will work fine, but don’t use a detergent.

Give it a good hand wash

Finally, we’re on to the paint. Nothing familiarizes you with the surface and shape of your car better than a hand wash, so roll up your sleeves and get to work.

Don’t use dishwashing detergent to wash your car. It will strip away the protective layer from the paint. Instead, use a carwash product designed for use on cars.

Polish

Next in line we’ve got to give the paint a good polish. The idea is to smooth out the surface of the paint, lending it an attractive shine. An oscillating polishing machine will do the trick, and it’s much easier to use than the rotating ones the pros use.

Wax

Wax protects your paint from contaminants and other elements that can damage your paint job. Think of it as the first line of defense, absorbing scratches and stains before they reach the paint underneath.

For wax to do its job protecting your paint, you should re-wax your car every 3 months.

Glass Last

You’re almost done—now it’s time to clean the windows and windshield. Don’t use a cleaner that contains ammonia, because it can damage vinyl upholstery.

A micro-fiber cloth is your best bet for cleaning glass. A rubber squeegee can wind up scratching the glass if dirt gets caught on it. In fact, to avoid scratching, use an air compressor to dry your car’s exterior.

Don’t forget the tiny details in detailing

The more time you’re willing to put in paying close attention to all the little details, the better your detail job is going to be.

And for those dents and scrapes that no amount of detailing can take care of, contact Herb’s auto body repair in Dallas.